For preview purpose only
RFX9400/37
Technical specifications
Product highlights
Wireless Extender
Date of issue 2006-10-25
Version: 1.0
12 NC: 9082 100 07357
UPC: 6 09585 11126 4
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
© 2006 Koninklijke Philips Electronics N.V.
All Rights reserved.
www.philips.com
Connectivity
•
Built-in wireless technology:
802.11g
•
Encryption / security:
WEP 128 bit, WEP 64
bit
•
IR emitter connectors:
4
•
Network mode:
DHCP, Fixed IP
• Ethernet
Convenience
•
Error indication:
LED
Accessories
•
AC/DC Adaptor:
5V DC 2A
•
Dual IR emitter wires:
2
•
Printed User Guide:
English, French, Spanish
•
Mini-jack IR cable:
2
Dimensions
•
Master carton quantity:
2
•
Master carton weight:
2.110 kg
•
Product dimension (WxDxH) inch:
6.2 x 3.9
x 1.3
•
Temperature range (operation):
32°F to
122°F
Customization
• Configuration via webserver
System Specifications
•
CPU:
Freescale 32 bit RISC
•
CPU speed:
266 MHz
Infrared Capabilities
•
Addressable IR output:
Adjustable IR output
level
RF Capabilities
•
Adresses (ID's):
16
•
Frequency (GHz):
2.4
• WiFi based
•
Adressable IR ports
Addressable IR ports enable control of the same type of
devices in a rack independently (by the same extender).
Typically this is the case with multiple set-top boxes to
distribute content throughout the house. Every device is
asigned its own dedicated IR port. As a result the device
will only receive the IR codes that are intended for this
device and not for any other. Without addressable IR
codes, every device will always receive all sent-out IR
codes.
Wired and/or wireless control
Depending on the situation the extender can be used
wired via ethernet for maximum reliability or wirelessly
using WiFi for a flexible installation.
Pronto protocol
The Pronto system uses standard WiFi for wireless control
but has added an additional smart protocol to guarantee
a reliable and timely execution of IR codes and macros.
Smart feedback
The smart 2-way Pronto protocol regulates the
commands that are sent from the Pronto control panel to
the extenders. Each extender will acknowledge the
execution and the user will be informed in case a
command cannot be executed.
IR code range
The powerful IR-circuit is capable of transmitting virtually
any IR code. Where many remote control systems are
limited to 125 kHz, the Pronto extenders can send IR-
frequencies to up to 1 MHz.
Out-of-the-box use
The extender works out of the box in stand alone mode
and requires no special settings. When encryption or fixed
IP is desired, the internal web browser is available via a
PC or laptop.
Feedback indicators
Colored LED's provide information about the system, such
as ethernet or WiFi connections, busy status or execution
of an IR, RS232 or relays command (RFX9600 only).
Errors are also displayed, helping the user to do
troubleshooting if necessary.
