Settings
23
PLPROFILE4 LED Luminaires
Installation & User’s Manual
Note:
If the Color Mix of a Factory Calibrated Preset is changed, by turning protection Off, an '*' is appended to the
end of the Preset's Name to indicate that the Calibrated values have been changed.
Editing Preset Names
On the
Edit Preset
screen, the option is available to edit the name of a preset, via Screen button. However, the names
of Presets 0-4 cannot be edited.
Use the [LEFT ARROW] and [RIGHT ARROW] keys to select the character to be changed and use the [UP
ARROW] and [DOWN ARROW] keys to change that character. The Character Scroll order is A-Z, space, 0-9. If you
are scrolling up the Alpha character displays as Upper Case; if you are scrolling down the Alpha character displays as
Lower Case. Stop on the character you want, ignoring case, then press the opposite [UP ARROW] or [DOWN
ARROW] key if you want to change the case. [OK] to save changes, [ESC] to cancel changes.
5. Settings
The following Parameters can be changed on the
Settings
Screen.
The first column "Security Level" is the minimum security level you have to be at before the line is displayed for
editing in the Settings screen.
To edit a value on the Setting Screen, use the [UP ARROW] or [DOWN ARROW] keys to move the highlight to the
settings value you wish to change. Press [OK] to begin editing that value. Use the [UP ARROW], [DOWN
ARROW], [LEFT ARROW] or [RIGHT ARROW] keys to make changes to the value. Press [OK] when complete to
save changes, or [ESC] to cancel changes to that value.
When done making changes on the Settings Screen press [ESC] to re-boot fixture and implement changes. Fixture
will not re-boot if nothing was changed.
Security Level
Parameter
Values
Default
Description
Security
1
Enter
PassPIN
4-Digits (0 to 9)
****
There are 4 levels of security, this allows
you to change the level while in the
Settings Screen.
3
Level 1 PIN
4-Digits (0 to 9)
1111
Sets Level 1 PassPIN
3
Level 2 PIN
4-Digits (0 to 9)
2222
Sets Level 2 PassPIN
3
Level 3 PIN
4-Digits (0 to 9)
3333
Sets Level 3 PassPIN
3
Power-Up
1 - 3 or Locked
3
Security Level after Power-Up, if not
Locked (Level 0)
General
1
Power-Up
Off, Scratch Pad,
Warm White, Cool
White, Day Light,
Preset30, Preset31,
Last Set
Cool White
When the Fixture Powers-Up what does it
output. Scratch Pad is an automatically
saved Preset. Last Set is the last thing
coming out of the fixture, this could be
Warm White with the intensity changed
from that of the Preset.
3
Reset Hours
No, Yes
No
Resets luminaire’s operational hours.
