8
Philips · PPX2240 · 2340
3 Initial Operation
Setting up the Device
A tripod accessory is available if you want to elevate the
device.
Connect power supply /
charge battery
Connect the USB plug to a computer, to charge the bat-
tery. Alternatively you may connect the USB plug to the
power adapter (not included) (see also chapter Com-
patible Power Supply, page 23).
Initial Installation
1
Switch the device on using the on/off switch on the
side.
2
Turn the device towards a suitable projection sur-
face or wall. Note that the distance to the projection
surface must be a minimum of 0.3 meters and a max-
imum of 2.1 meters. Make sure the projector is in a
secure position.
3
Use the focus wheel on the top to adjust the image
sharpness.
4
Select the desired menu language using
/
.
5
Confirm with
à
.
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of the
power supply matches the mains voltage avail-
able at the setup location.
Note
The main menu appears instead of
the language selection
The device has already been installed. In
order to change the menu language, pro-
ceed as follows:
1
Use the navigation keys to select
Set-
tings
.
2
Confirm with
à
.
3
Select with
/
Language
.
4
Confirm with
à
.
5
Select the desired language with
/
.
6
Confirm with
à
.
7
Exit with
¿
.
