EN 11
En
gli
sh
Watch TV
Switch TV on or off
For PFG4309 - 40 inch TVs:
For PHG41x9 - 23 to 28 inch TVs:
For PxG4009 - 32 to 50 inch TVs:
For PxG4109 - 32 to 50 inch TVs:
Switch the TV on
•
Connect the TV to the mains outlet
and switch on the main power.
•
If the standby LED is lit, press on
the remote control.
Note:
There is a short delay before the TV
responds.
Tip:
If you cannot find your remote control
and want to switch on the TV from standby,
press on the TV. The standby LED
switches off, then press again.
Switch TV to standby
Press on the remote control.
The standby LED on the TV switches to red.
Switch off the TV
Press on the TV.
The standby LED switches to off.
Note:
Though your TV consumes very little
energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.
Automatic switch off
You can save energy with this TV's energy
efficiency settings, which are enabled by
default. If there is no user interaction (such
as pressing a remote control button or a
control on the TV) for four hours, the TV
will automatically switch to standby.
To disable automatic switch off
1. While you watch TV, press the
Green
button
on the remote control.
2. Select
[Auto switch off]
, then press
OK
.
3. Use the
Navigation buttons
to make a
selection, then press
OK
.
Adjust TV volume
Increase or decrease the TV volume
•
Press
+/-
on the remote control.
Mute or restore the TV volume
•
Press
on the remote control to
mute the volume.
•
Press
again to restore the volume.
Adjust headphone volume
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[Sound]
>
[Headphone volume]
, then press
OK
.
3. Select a level.
