18
English
TROUBLESHOOTING
Symptom Remedy
Disc can’t be played
– Ensure the disc label is upwards.
– Clean the disc.
– Check if the disc is defective by trying anoth-
er disc
The player does not
– Aim the remote control directly at the
respond to the remote
sensor on the front of the player. Avoid all
control
obstacles that may interfere with the signal
path. Inspect or replace the batteries.
Distorted or B/W
– Use only discs formatted according to the
picture with DVD
TV-set used (PAL).
Player does not respond
– Operations are not permitted by the disc.
to all operating commands
– Refer to the instructions in the disc inlay.
during playback
Player feels warm
– When the player is in use for a long
period of time, the surface will be heated.
This is normal.
This set complies with the radio interference requirements of the
European Union.
TECHNICAL DATA
Dimensions
270 x 220 x 90 mm
Weight 1.63
kg
Power supply
DC 9V 1.5A
Power Consumption
12W
Operating temperature range
0 - 45°C
Laser wavelength
650nm
Video system
PAL
Frequency response
20Hz ~ 20KHz ± 1dB
Signal/noise ratio
≥
80dB
Audio dist noise
≤
-80(1KHz)
Channel separation
≥
80dB
Dynamic range
≥
80dB
Output
Audio out (analog audio)
Output level: 2V ± 10%
Load impedance:
10K
Ω
Video out Output level:
1Vp - p ± 20%
Load impedance:
75
Ω
PHILIPS reserves the right to make design and specification
changes for product improvement without prior notice.
Modifications not authorized by the manufacturer may void users
authority to operate this device.
All rights reserved.
P001-019_PET988_12_Eng 2008.8.8 18:43 Page 18
