Philips PET320, Service Manual

Page: 2 / 33

1. TECHNICAL SPECIFICATION
General
Dimensions (WxLxH) : 154.5mm*164.48mm*27.61mm
(+- 0.3mm)
Weight : 546.6g +- 10g
Power supply : +5V / 2A
Power consumption : Play back :4W
Operating temp. range : 0 – 50 Degree
Laser wavelength: DVD 655nm, CD 790nm
Video system : NTSC/PAL/AUTO.
Frequency response : Audio +1dB / -0.5dB
Signal/noise ratio Audio > 80 dB
Audio dist noise Audio < 0.6 %
Channel separation: Audio > 85 dB
Dynamic range Audio > 80 dB
Output
Audio out (analog audio)
1.2 V +/- 0.1V rms
Load impedance: 47K ohm
Video out Output level: 1 V p-p
Load impedance: 75 ohm
Current consumption
DC-IN SUPPLY (5.0V)
Battery Charging Current Stand by : 1.7 Amp
Operating : 0.85 Amp
BATT. SUPPLY (3.6V)
Power Off 3.4V
Playback with TFT on 1.45A ( Normal volume)
Playback without TFT on 0.9A ( Normal volume)
Battery playtime 2.5Hours
Headphone out (headphone output load 2x16 ohm)
Maximum output power : 2.3mW
Frequency response : +/- 3dB
SNR (A-wght) : 80 dB
THD (1kHz) : 1 %
Left-Right Channel
Separation : 55 dB
Left-Right Channel
Balance : 2 dB
Supported disc type
DVD video discs:
Video CD:
Audio CD :
Applicable DVD Formats DVD-Video on DVD-
ROM (DVD-5, DVD-9,
DVD-10, DVD-18), DVD-
R, DVD-RW, DVD+R
and DVD+RW
Applicable CD Formats (Read) CD-DA, Video CD
(MPEG-1),
MP3/WMA/JPEG CD on
CD-ROM, CD-R, and
CD-RW
Disc Diameter 8cm/12cm
Software upgrades
For the best performance of your DVD Portable.
Check
www.philips.com/support
for latest
software upgrades available.
To check the software version of your DVD
Portable.
1. Press
the f II key to power on the player
2. Insert a DVD disc into the player
3. Press SETUP key to enter the set up menu
4. Press MENU + MENU + OSD key within 1
sec
5. The display will show the software version on
the screen as below:
Procedure on how to upgrade the software of the
DVD Portable
1. Download the latest software from the Philips
support site
2. Unzipped the files and then burn it onto a CD
ROM then playback the CD ROM on the DVD
Portable
3.
Press the OK key to upgrade the software
Pixel specification
<= 4 (max. 1 bright dots and 3 dark dots)
SET :
VER :
MODEL :
SETUP MENU