Philips ONIS 6816, User Manual

Page: 8 / 17

Installing your extra handset
10
Registering your extra handset with your
Onis base station
To register your extra handset with your base station, proceed as
follows:
Unplug the power cable of the base station, then plug it
in again.
The base station beeps to indicate that it is now in
registration mode.
Move the handset to be registered close to the base
station and press
R
on the handset to enter menu
mode.
Press
+
to display
SETUP
, then press
o
.
Press
-
until
REGISTER
is displayed, then press
o
.
CODE?
is displayed.
Enter the registration code (this is given on a sticker
labelled “RC” under the base station). Press
o
.
The handset will search for a base station that is in
registration mode.
After a few seconds, the handset beeps and
REGISTER
is displayed. In this case go to the next step.
If the handset cannot find a base station,
FAILED
will be
displayed, and you will need to try again.
Press
R
to leave menu mode.
It is also possible to set the base station to registration mode using a
handset that has already been registered. Instead of step 1 above,
proceed as follows:
1. Press
R
, then press
+
to display
SETUP
. Press
o
.
2.
Press
-
until
ADD HS
is displayed. Press
o
.
3.
Enter the registration code (this is given on a sticker labelled “RC”
under the base station). Press
o
.
Your handset beeps to indicate that the base station is now in
registration mode.
1
2
3
4
5
6