9
EN
1
Open the battery compartment.
2
Insert one AAA battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the product.
•
Risk of electric shock! When you unplug the power
cord, always pull the plug from the socket. Never pull
the cord.
Note
•
Before connecting to AC power, make sure that you
have completed all other connections.
1
Adjust the voltage selector on the back of
the main unit to match your local power
supply.
2
Connect the AC power plug to the power
outlet.
Set clock
1
In standby mode, press and hold
CLOCK
for two seconds.
»
[CLOCK SET]
appears, then
[12H]
or
[24H]
is displayed.
2
Press / repeatedly to select 12 hour
or 24 hour format.
3
Press
CLOCK
to confirm.
»
The hour digit flashes.
4
Repeat steps 2 to 3 to set the hour and
minute.
Note
•
To cancel clock setting, press .
•
During clock setting, if no action is taken within 90 seconds,
the product exits clock setting mode automatically.
•
The clock is displayed in standby mode. To view the
clock in working or ECO power standby mode, press
and hold
CLOCK
for two seconds.
Turn on
Press .
»
The product switches to the last
selected source.
Switch to standby mode
Press again to switch the product to standby
mode.
»
The clock (if set) is displayed.
To switch between standby mode and Eco
power standby mode:
Press and hold for two seconds.
»
In Eco power standby mode, the
button lights up red, and the display
backlight is off.
Tip
•
The product switches to Eco power standby mode
automatically after 10 minutes in standby mode.
Summary of Contents for NTX400
Page 2: ......
