Philips NT1140/15, Manual

Page: 23 / 32

22
3 Carefully insert the trimming head into the outer
ear channel.
Do not insert the trimming head more than
0.5 cm into your ear channel, as this could
damage the eardrum.
4 Slowly turn the trimming head around to
remove all unwanted hairs from your outer ear
channel (Fig. 11).
5 Switch off the appliance.
6 Clean the appliance after each use (see
'Cleaning').
Cleaning
Clean the appliance immediately after use and
when a lot of hair or dirt has accumulated on the
cutting elements.
Do not immerse the motor unit in water or any
other liquid, or rinse it under the tap.
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as petrol or
acetone to clean the appliance.
Do not tap on the cutting elements.
Do not use any sharp objects to clean the
cutting elements.
English