13
First-time connection to
home network
After you select
[No]
to decline to view the
demo, NP2900 prompts you to select your
location / time zone. NP2900 also reminds
you to register NP2900 at
www.philips.com/
welcome
and to install the PC software.
This is how to navigate and select with the
remote control:
Press
•
or to select a menu option.
Press
•
OK
to confirm a selection.
Press
•
BACK
to go back to the
previous screen.
Press
•
HOME
to go to the Home menu.
1
Select the location / time zone and
confirm.
NP2900 shows the prompt for the
»
network connection.
2
Select
[Yes]
, to create a connection to
the network.
NP2900 shows the prompt for the
»
network setup (if no network has been
set up yet).
Select
»
[No]
to exit the setup and go
to the Home menu.
3
Continue with one of the following
options:
First-time setup:
•
Wireless network
connection with automatic IP address
This setup requires the following:
A wireless access point or wireless
•
router with broadband Internet
access
Manual entry of your encryption key
•
(for encrypted network connections
only)
First-time setup:
•
Wireless network
connection with static IP address
This setup requires the following:
A wireless access point or wireless
•
router with broadband Internet
access
Manual entry of your IP address.
•
7 First-time setup
This is how to navigate and select with the
remote control:
Press
•
or to select a menu option.
Press
•
OK
to confirm a selection.
Press
•
BACK
to go back to the
previous screen.
Press
•
HOME
to go to the Home menu.
When you connect NP2900 to the
power supply for the first time, NP2900
displays the prompt for the language
selection.
1
Select the language and confirm.
NP2900 displays the prompt for the
»
optional demo play.
You have two options:
View the demo.
•
Complete the first-time setup.
•
Tip
After the first-time set-up, you can change the
•
language in the Settings menu.
View the demo
1
Select
“[Yes, show me the demo]”
, to
view the demo.
The demo plays continuously until you
»
exit the demo play.
2
To exit the demo play, press .
Note
NP2900 remains in first-time setup status until
•
you select
[No]
to decline the demo play.
You can start the demo play again with the
•
DEMO
button on the remote control or in the
Settings menu of NP2900.
English
EN
