Beard trimming with beard trimming comb
1
Attach the trimmer onto the handle (‘click’). (Fig. 8)
2
Slide the beard trimming comb into the guiding grooves on both sides
of the handle (‘click’) (Fig. 25).
To set the comb to the desired setting, press the setting selector (1)
and slide the comb to the desired hair length setting (2) (Fig. 26).
You can choose any setting between 2 and 18mm.
4
Switch on the appliance (Fig. 11).
5
Slowly move the trimmer against the hair growth direction. Press
lightly and always make sure the surface of the comb is in full contact
with the skin.
Note: When you trim for the first time, start at the highest setting (18mm) to
familiarise yourself with the appliance.
styling/contouring your beard
You can use the precision trimmer to cut shapes in beard hair or scalp hair.
It cuts hair very close to the skin, i.e. a length of 1mm.
Caution: Be careful when you use the precision trimmer because it
removes every hair it comes in contact with.
1
Attach the precision comb onto the handle. (Fig. 27)
2
To achieve a good cutting result, move the precision trimmer against
the direction of hair growth. Always make sure the precision trimmer
is in full contact with the skin (Fig. 28).
Make careful and controlled movements with the precision trimmer.
Tip: For the perfect finish, you can use the micro shaver to make the edges and
lines of your beard style even smoother
(Fig.
29).
Grooming facial hair (nose and ear hair)
Trimming nose hair
1
Attach the nose/ear hair trimmer onto the handle (‘click’) (Fig. 0).
EnGlish