19
18
ENGLISH
Charging Razor with Jet Clean
System (1180XCC, 1160XCC)
1
Connect the small plug to the Jet Clean
System. Connect the charging plug into
any 100V to 240V AC outlet. Use only the
power cord provided.
The razor holder automatically moves up to the
highest position.
C
2
Remove protective cap from razor.
NOTE: The razor cannot be placed in the Jet
Clean System when the trimmer or protective
cap is placed on the razor.
C
3
Place the razor head side down in the
razor holder with the display facing the
front of the Jet Clean System.
C
4
Place the razor into the holder behind the
two clips (1) and press the razor down to
lock it into place (2).
5
The display on the razor will indicate razor
is charging.
6
Charging requires one full hour. A fully
charged razor has a cordless shaving
time of up to 50 minutes (Models 1190X,
1180X, 1180XCC, 1160X and 1160XCC)
or 40 minutes (Model 1150X).
ENGLISH
Recharging
1
Recharging requires one full hour.
Recharge when the bottom charging light
blinks orange (models 1190X, 1180X,
1180XCC) or the plug symbol blinks
(models 1160X, 1160XCC and 1150X).
Quick Charge
When batteries are totally depleted, recharging
the razor for approximately 3-5 minutes gives
enough energy for a 3-minute cordless shave.
Put It To The Test & Shaving Tips
◗
21 Day Trial and Conversion Process. It is a fact
that your skin and beard need time to adjust to
a new shaving system.
◗
Use your new razor exclusively for 3 weeks to
fully enjoy the closeness of a Philips Norelco
shave.
◗
At first you may not get as close a shave as you
expect, or your face may even become slightly
irritated. This is normal since your beard and
skin will need time to adjust. Invest 3 weeks
and you’ll soon experience the full joy of your
new razor.
◗
Stick with it! If you alternate shaving methods
during the adjustment period, it may make it
more difficult to adapt to the Philips Norelco
shaving system.
1
2
