Philips MX2600/55, Service Manual

Page: 12 / 38

3-2
SERVICE POSITIONS
Service position A
Service position B
Note: In some service positions the components or copper patterns of one board may risk touching its neighbouring pc
boards or metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them.
3-2
Dismantling of the Main & Tuner PCB
1) Loosen 10 screw " D " at the back panel as shown in figure
6.
2) Loosen 4 screw " E " on the top of main board and loosen
2 screw on the bottom panel as shown in figure 7
Figure 6
Figure 7
E
D
E