Make overlapping passes over the head to ensure that you cut all the hair
that needs to be cut.
hair clipping without hair clipping comb
You can use the trimmer without comb to clip hair very close to the skin,
i.e. to a length of 1mm or to create contours.
Caution: Be careful when you clip without the comb because the trimmer
removes every hair it comes in contact with.
1
Press the setting selector (1) and slide the comb upwards (2). Then
pull the comb off the appliance () (Fig. 1).
2
Before you start to contour the hairline around the ears, comb the
hair ends over the ears.
Tilt the appliance in such a way that only one edge of the trimmer
touches the hair (Fig. 1).
Only cut the hair ends. The hairline should be close to the ear.
To contour the neckline and sideburns, turn the appliance and make
downward strokes (Fig. 15).
5
Move the appliance slowly and smoothly. Follow the natural hairline.
Beard trimming
When you trim your beard for the first time, be careful. Do not move the
trimmer too fast. Make smooth and gentle movements.
Beard trimming with beard trimming comb
1
Attach the trimmer onto the handle (‘click’). (Fig. 7)
2
Slide the beard trimming comb into the guiding grooves on both sides
of the handle (‘click’) (Fig. 16).
To set the comb to the desired setting, press the setting selector (1)
and slide the comb to the desired hair length setting (2) (Fig. 17).
You can choose any setting between 2 and 18mm.
Switch on the appliance (Fig. 10).
EnGlish
