- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Charging
Battery status indications
- When the battery is almost empty, the battery
status indicator flashes orange (Fig. 2).
- When the appliance is charging, the battery
status indicator flashes white slowly (Fig. 3).
- During quick charge, the battery status indicator
flashes white. After approx. 5 minutes of
charging, the appliance contains enough power
for one cordless trimming session.
- When the battery is fully charged, the battery
status indicator lights up white continuously
(Fig. 4).
Note: After approx. 30 minutes, the light goes out
automatically.
Charging
Charge the appliance before you use it for the first
time and when the display indicates that the
battery is almost empty. When the appliance has
charged for 3 hours, it has a cordless operating
time of up to 6 hours.
1
Make sure the appliance is switched off.
2 Insert the small plug into the appliance and put
the supply unit in the wall socket.
3 After charging, remove the supply unit from the
wall outlet and pull the small plug out of the
appliance.
Quick charge
After approx. 5 minutes charging, the appliance
contains enough power for one cordless trimming
session.
Using the appliance
Note: This appliance can be used without cord or
directly from the power outlet.
Note: Switch off and clean the appliance after each
use.
Detaching and attaching cutting elements
1
To detach a cutting element, push upwards
against the teeth of the cutting element and
take it off the handle (Fig. 6).
2 To attach a cutting element, insert the lug of the
cutting element into the guiding slot at the front
and push the back of the cutting element onto
the appliance ('click') (Fig. 7).
Detaching the precision shaver and nose
trimmer
1
Place your finger on the arrow at the back of
the attachment and push it off the handle in the
direction of the arrow (Fig. 8).
Attaching and detaching combs
1
To attach any type of guard onto a cutting
element, slide the front part of the guard onto
the teeth of the cutting element. Then push
down the center of the guard with your fingers
or the palm of your hand ('click') (Fig. 9).
2 To detach any type of comb from the cutting
element, carefully pull its back part off the
appliance and then slide it off the cutting
element (Fig. 10).
Note: When trimming for the first time, start by
using the comb with the maximum trimming
length setting to familiarize yourself with the
appliance.
Turning the appliance on and off
Press the on/off button once to turn the appliance
on or off (Fig. 11).
Attachments for use on beard
Full-size hair trimmer
Use the full-size hair trimmer without a comb to
trim hair close to the skin (to a length of 1/32in
(0.5mm) or to create clean lines around your
beard, neck and sideburns.
1
To trim hair close to the skin, place the flat side
of the cutting element against your skin and
make strokes against the direction of hair
growth (Fig. 12).
2 For contouring, hold the cutting element
perpendicular to the skin and move it upwards
or downwards with gentle pressure (Fig. 13).
Beard combs
Attach a beard comb to the full-size hair trimmer to
trim your beard and moustache evenly. The
appliance comes with 5 beard combs. The hair
length settings are indicated on the combs. The
settings correspond to the remaining hair length
after trimming.
Comb
inch
mm
Stubble comb
3/64in.
1mm
Stubble comb
5/64in.
2mm
Beard comb
1/8in.
3mm
Beard comb
3/16in.
5mm
Beard comb
9/32in.
7mm
1
Attach the comb to the full-size hair trimmer.
2 To trim the most effective way, move the comb
against the direction of hair growth. Make sure
the surface of the comb always stays in contact
with the skin.
Attachments for use on body
- Use the green body combs to trim body hair.
- When you trim for the first time, use the
5mm/3/16in. body comb to familiarize yourself
with the appliance.
- Make sure hair is clean and dry as wet hair
tends to stick to the body and, when trimming
sensitive areas, always use a body comb.
- Since all hairs do not grow in the same
direction, you may want to try different
trimming positions (i.e. upwards, downwards, or
across). Practice is best for optimum results.
- Always make smooth and gentle movements
and be sure the surface of the comb always
stays in contact with your skin.
