9
EN
1
Press / or
MENU/OK
>
[Answer
machine]
.
2
Select
[Remote access]
>
[Change
PIN]
, then press
MENU/OK
to
confirm.
3
Enter the old PIN, then press
MENU/OK
to confirm.
4
Enter the new PIN code, then press
MENU/OK
to confirm.
5
Enter the new PIN code again, then
press
MENU/OK
to confirm.
»
The setting is saved.
Charge the handset
Charge your handset by docking it in
either direction. When the handset is
placed correctly on the base station,
you hear a docking tone (see 'Set the
docking tone' on page 22).
»
The handset starts charging.
Note
•
Charge the batteries for 8 hours before first
use.
•
If the handset becomes warm when the
batteries are being charged, it is normal.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current
battery level.
When the handset is off
the base station, the bars
indicate the battery level
(full, medium and low).
When the handset is on the
base station/charger, the
bars flash until charging is
complete.
The empty battery icon
flashes. The battery is low
and needs recharging.
The handset turns off if the batteries
are empty. If you are on the phone,
you hear warning tones when the
batteries are almost empty. The call gets
disconnected after the warning.
What is standby mode?
Your phone is in standby mode when
it is idle. The handset name, date
and time, and handset number are
displayed on the standby screen.
Display icons
In standby mode, the icons shown on
the main screen tell you what features
are available on your handset.
