23
EN
Set the date and time
For information, see 'Set the date and
time' in the 'Get started' section.
Set the display language
Note
•
This feature only applies to models with
multiple-language support.
•
Languages available vary from country to
country.
1
Press
MENU/OK
.
2
Select
[Phone setup]
>
[Language]
,
then press
MENU/OK
to confirm.
3
Select a language, then press
MENU/OK
to confirm.
»
The setting is saved.
ECO+ mode
When the
ECO+
mode is activated, it
eliminates the radiation of the handset
and base station in standby mode.
1
Press
MENU/OK
.
2
Select
[Phone setup]
>
[ECO+
mode]
, then press
MENU/OK
to
confirm.
3
Select
[On]
/
[Off]
, and press
MENU/
OK
to confirm.
»
The setting is saved.
»
ECO+
is displayed in standby
mode after a while.
Note
•
Make sure that all the handsets registered to
the base station are M560/M565 in order to
have the
ECO+
feature functioning properly.
•
When
ECO+
is activated, the standby time is
reduced. This is because in
ECO+
mode the
base station is not transmitting any signal in
standby mode; therefore the handset needs
to “listen” more frequently for signals from the
base station to detect incoming calls or other
requests from the base station. The time it
takes for the handset to access features like
call setup, call log, paging, and phonebook
browsing is also delayed. The handset will not
alert you to link loss in case of power loss or
moving out of range.
