Philips MCM720, Service Manual

Page: 8 / 38

4
-1
4
4 - 1
DISMANTLING INSTRUCTIONS
Dismantling of the Cover Cassette and Universal Loader
1) Push 1 catch each on the left & right side then remove
the Cover Cassette in the direction as shown in Figure 1
and Figure 1A.
2) Loosen 8 screws to remove the Cover Top by sliding
it out towards the rear before lifting up.
- 6 screws on the rear
- 1 screw each on the left & right side
3) Loosen 2 screws each to remove the Panel Left and
Panel Right. The Panels are removed by sliding it
towards the rear and outwards.
- 1 screw on the rear
- 1 screw on the side
- see Service position A
6) Loosen 2 screws A (see Figure 2) to remove the Bracket
Module Mounting and CD Module.
- 1 screw each on the left & right side
Detaching the Front Panel assembly from the Bottom/Rear assembly
Figure 1
Figure 1A
Figure 2
Lift up and out
Push catches on two sides
A
Figure 3
1) Remove 2 screws B (see Figure 3) from the bottom of the
Cabinet Front.
Detaching the Front Panel assembly from the Bottom/Rear assembly
2) Release the fixation of the Combi Board (pos1102-1003)
to Bracket Combi (pos 155) by releasing the 2 catches C1
(see Figure 7) and pulling the Combi Board outwards as
shown in Figure 7A.
3) Uncatch 2 catches C2 (see Figure 7) on the left & right
sides of the Cabinet Front (pos 101) and slides the Front
Panel assembly out towards the front.
- see Service position C
B
Figure 4A
Figure 4
Dismantling of the Front Panel assembly
1) The Knob Volume can be remove by pulling it out
in the direction as shown in Figure 5.
2)
3) Loosen 3 screws D (see Figure 6) to remove Front
Display Board.
4)
Loosen 3 screws C (see Figure 6) to remove the Bracket
Front Cabinet Display.
5)
Loosen 2 screws E (see Figure 6) to remove the
Headphone Board.
Figure 5
Loosen 4 screws F (see Figure 7) to remove the Module
Tape Deck.