Philips MCM595/21, Service Manual

Page: 3 / 66

1-3
SPECIFICATIONS
GENERAL:
Mains voltage : 110-127V/220-240V Switchable for /21
Mains frequency : 50/60Hz
Clock accuracy : < 4 seconds per day
Dimension centre unit : 175 x 268 x 316mm
Power consumption
Active : 120W
Standby : < 15W (DEMO mode off)
ECO Power Standby : < 1W
TUNER:
FM
Tuning range : 87.5-108MHz
Grid : 50kHz
IF frequency : 10.7MHz ± 25kHz
Aerial input : 75 ohm coaxial
Sensitivity at 26dB S/N : < 7uV
Selectivity at 600kHz bandwidth : > 25dB
Image rejection : > 25dB [> 75dB]
Distortion at RF=1mV, dev. 75kHz : < 3%
-3dB Limiting point : < 8uV
Crosstalk at RF=1mV, dev. 40kHz : > 18dB
MW
Tuning range : 530-1700kHz
Grid : 10kHz
IF frequency : 450kHz ± 1kHz
Aerial input : Frame aerial
Sensitivity at 26dB S/N : < 4.4mV/M
Selectivity at 18kHz bandwidth : > 18dB
IF rejection : > 45dB
Image rejection : > 28dB
Distortion at RF=50mV, M=80% : < 5%
AMPLIFIER:
Output power (4 ohm, 1kHz, 10% THD)
L & R : 2 x 150W RMS
Frequency response within -3dB : 60Hz-16kHz
MAX Sound : On / Off
Digital Sound Control (DSC) : Jazz / Rock / Pop / Optimal
Virtual Environment Control (VEC) : Cyber Hall / Concert /
Cinema / Off
Input sensitivity
Aux in (at 1kHz) : 500mV at 600 ohm
CDR in (at 1kHz) : 1000mV at 600 ohm
USB (at 1kHz) : 830mV at 600 ohm
Output sensitivity
Headphone output at 32 ohm : 700mV ± 2dB (Max. vol.)
5DTC:
Measurement done directly at the connector on the board.
Output Resistance : < 100 ohm
Output Voltage (0dB, 1kHz) : 0.5Vrms ± 1dB (unloaded)
Channel Unbalance : <
±
1dB
Channel Separation (1kHz) : > 60dB
Frequency Response (
±
3dB) : 20Hz-20kHz
Signal to Noise Ratio : > 76dBA
MP3-CD Bit Rate : 32-256 kbps
Sampling Frequencies : 32, 44.1, 48 kHz
USB:
Measurement done directly at the connector on the board.
Output Resistance : < 1.5 kohm
Output Voltage (0dB, 1kHz) : 830mVrms ± 1.5dB
(R
L
= 33 kohm)
Channel Unbalance : < ± 1dB
THD + Noise (0dB, 1kHz) : < 0.35%
Channel Separation (0dB, 1kHz) : > 40dB
Frequency Response ( ± 3dB) : 50Hz-16kHz
Signal to Noise Ratio : > 75dBA
[....] Values indicated are for "ECO6 Cenelec Board" only.