English
15
Clock/Timer
Setting the sleep timer
The sleep timer enables the system to switch off
by itself after a set period of time.
1
In active mode, press
SLEEP
on the remote
control repeatedly until the desired timer option
appears.
➜
Selections are as follows (time in minutes):
SLPOFF
=
SLP120
=
SLP90
=
SLP60
=
SLP45
=
SLP30
=
SLP15
=
SLPOFF
➜
Display shows if activated, and disappears if
deactivated.
2
To cancel the sleep function
, either press
SLEEP
on the remote control once or more
until “
SLPOFF
” appears, or press
STANDBY-
ON
(
y
on the remote) to switch to standby
mode.
Setting the clock
1
In standby mode, press and hold
DISPLAY/
CLOCK
.
➜
The clock digits for the hours flash.
2
Press
PRESET
+/-
í
/
ë
(
í
/
ë
on the
remote) to set the hours.
3
Press
DISPLAY/CLOCK
.
➜
The clock digits for the minutes flash.
4
Press
PRESET
+/-
í
/
ë
(
í
/
ë
on the
remote) to set the minutes.
5
Press
DISPLAY/CLOCK
to confirm the time.
Note:
– If the clock has not been set, - - : - - will be
displayed.
External Sources
Connecting external equipment
1
Connect the audio out terminal of the portable
device (i.e. iPod or MP3 player) to the
MP3
LINK
terminal of your system.
2
Press
SOURCE
once or more to select
MP3
LINK
.
➜
"
MP3
in
" is displayed.
Note:
– All the sound control features (DSC or DBB, for
example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
pg 001-018_MCM285-77_Eng
2008.5.7, 16:55
15
