Philips MCM239, User Manual

Page: 23 / 28

English
23
USB AUX
AUX (Listening to an external
source)
You can listen to the sound of the connected
external device through your MCM239.
1
Check the external device has been properly
connected (See
Installation, Connecting an
additional appliance )
2
Press SOURCE once or more to select AUX
(or
AUX
on the remote control)
3
To avoid noise distortion, turn down the volume
on your external device
4
Press the
PLAY
key on the connected device to
start playback
5
To adjust the sound and volume, use the sound
controls on your external device and the
MCM239.
1
Check the USB device has been properly
connected. (See
Installation: Connecting an
additional appliance
)
2
Press
SOURCE
once or more to select
USB
(or
USB
on the remote control)
➜
The icon appears
–
NO AUDIO
appears if no audio file is found in
the USB device
3
Play the USB’s audio files as you do with the
albums/tracks on a CD (See
CD
)
Note:
– For compatibility reasons, the album/track
information may differ from what it is displayed
through flash players’ music management software.
– File names or ID3 tags will be displayed as
---
if they are not in English.
INFORMATION REGARDING USB DIRECT:
1. Compatibility of the USB connection on this micro
system:
a) This micro system supports most USB Mass
storage devices (MSD) that these devices are
compliant to the USB MSD standards.
i) Most common Mass storage class devices are
flash drives, memory sticks, jump drives and
etc.
ii) If you see a "Disc Drive" showing up on
your computer after you have plugged the
mass storage device into your computer, most
likely it is MSD compliant and it will work
with this micro system.
b) If your Mass storage device requires a battery/
power source, please make sure you have a
fresh battery in it or charge the USB device
first and then plug it into the micro system
again.
2) Supported Music type:
a) This device only supports unprotected music
with file extension: .mp3 .wma
b) Music bought from on-line music stores are not
supported because they are secured by Digital
Rights Management protection (DRM).
c) File name extensions that ended with the
following are not supported: .wav; .m4a; .m4p;
.mp4; .aac and etc.
3) No Direct connection can be made from a
Computer USB port to the micro system even you
have either or both mp3 or wma file in your
-computer.
P001-P027_MCM239_12_Eng 22/8/07, 11:32 23