background image

15

Ko

re

a

Specifications

AMPLIFIER

Output power .......................................... 2 x 5 W RMS

.......................................................... 10 W + 10W PMPO

Signal-to-noise ratio ..........................

 65 dBA (IEC)

Frequency response .......................... 63 – 16000 Hz
Impedance loudspeakers ........................................... 4

CD PLAYER

Frequency range .................................. 63 – 16000 Hz
Signal-to-noise ratio ............................................ 65 dBA

TUNER

FM wave range ................................... 87.5 – 108 MHz
MW wave range (9 kHz) ............. 531 – 1602 kHz
MW wave range (10 kHz) ........... 530 – 1700 kHz
Tuning grid ............................................................ 9/10 kHz
Sensitivity at 75 

– FM 26 dB sensitivity .......................................... 20 µV
– MW 26 dB sensitivity ................................... 5 mV/m
Total harmonic distortion .....................................

 5%

TAPE DECK

Frequency response

Normal tape (type I) ... 120 – 10000 Hz (8 dB)

Signal-to-noise ratio

Normal tape (type I) ....................................  48 dBA

Wow and flutter .........................................

 0.4% DIN

SPEAKERS

Bass reflex system
Dimensions (w x h x d) . 142 x 235 x 212 (mm)

GENERAL INFORMATION

AC Power

For Version /21-21M .. 110 – 127 / 220 – 240 V;

....................................................... 50/60 Hz Switchable

For Version /30 ........................ 230 – 240 V; 50 Hz

Dimensions (w x h x d) ... 148 x 235 x 258(mm)
Weight (with/without speakers) ..................................

............................................................... approx. 5.9 / 2.7 kg

Power consumption

Active .......................................................................... 10 W
Standby .................................................................... < 3 W

Specifications and external appearance are
subject to change without notice.

WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty.  Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.

NO DISC

” is displayed.

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at the lens
has cleared.

Replace or clean the disc, see “Maintenance”.

Use a finalized CD-RW or a correct MP3-CD
format disc.

Problem

Solution

Troubleshooting

PG 001-020_MCM190_33

13/4/05, 11:05

15

Summary of Contents for MCM190





















Reviews: