Note
Insert the stripped portion of each speaker wire into the socket
•
completely.
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the same or higher than
•
the supplied speakers. Refer to the Specifications section of this manual.
1
For the right speaker, find the sockets on the main unit marked
‘RIGHT’.
2
Insert the red wire to the red (+) socket. To insert each speaker
wire:
a
Hold down the socket flap.
b
Insert the speaker wire fully.
c
Release the socket flap.
3
Insert the black wire into the black (-) socket.
4
For the left speaker, find the sockets on the main unit marked
‘LEFT’.
5
Repeat steps 2-3.