7
EN
Prepare the remote control
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
For first-time use:
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Turn on
Press
POWER
.
»
The unit switches to the last selected
source.
Switch to standby
Press
POWER
again to switch the unit to
standby mode.
»
The red standby indicator turns on.
»
The backlight on the display panel turns off.
4 Play
Play from disc
1
Press
SOURCE
repeatedly to select the
DISC
source.
2
Pull to open the disc compartment on the
top of the device.
3
Insert a disc with printed side facing
upward.
4
Close the disc compartment.
»
Play starts automatically. If not, press
.
Play from USB
Note
•
Make sure that the USB device contains playable audio
content.
1
Press
SOURCE
repeatedly to select the
USB
source.
Summary of Contents for MCM129
Page 2: ......
