12
5
Press
CLOCK/DISPLAY
#*
»
The minute digits are displayed and
begin to blink.
6
Press /
to set the minute.
7
Press
CLOCK/DISPLAY
#*
Tip
To view the clock during play, press
CLOCK/
DISPLAY
repeatedly until the clock is
displayed.
Turn on
1
Press
POWER
.
»
The unit switches to the last selected
source.
Switch to standby
1
Press
POWER
to switch the unit to
standby mode.
»
The backlight on the display panel is
dimmed.
»
The clock (if set) appears on the
display panel.
Note
If you are not going to use the remote control
for a long time, remove the batteries.
Do not use old and new or different types of
batteries in combination.
Batteries contain chemical substances, so they
should be disposed of properly.
Auto install radio stations
When you connect the unit to the power
&<" #
stored in this unit, Plug and Play is activated to
store all available radio stations automatically.
1
Connect the unit to the power supply.
»
[AUTO INSTALL - PLEASE PRESS
PLAY, STOP CANCEL] (press the
PLAY button to auto install; to cancel,
press ) displays.
2
Press on the main unit to start
installation.
»
[AUTO] displays.
»
The unit automatically store radio
> " '& ' *
»
When all the available radio stations
is broadcast automatically.
Set clock
1
Press and hold
CLOCK/DISPLAY
to
activate the clock setting mode.
»
The 12 hour or 24 hour format is
displayed.
2
Press
PROG
repeatedly to select 12 hour
or 24 hour format.
3
Press
CLOCK/DISPLAY
#*
»
The hour digits are displayed and begin
to blink.
4
Press /
to set the hour.
EN
