34
English
Radio Reception
Tuning to radio stations
1
Press
ECO POWER/STANDBY-ON
y
to
switch on the last selected source.
2
Press
SOURCE
(
TUNER
on the remote
control) to select TUNER (FM) mode.
3
Press and hold
¡
/
™
(or
2
/
3
on the remote
control) until the frequency indication starts to
change, then release.
➜
The system automatically tunes to the next
strong radio station.
●
To tune to a weak station, press
¡
/
™
(or
2
/
3
on the remote control) briefly and repeatedly
until an optimal reception is found.
4
Repeat Step 3 if necessary until you find the
desired radio station.
Presetting radio stations
You can preset up to 40 stations regardless of
the reception.
Automatic progamming
●
Press
PROGRAM
on the remote for more
than two seconds to activate programming.
➜
All available stations are programmed.
Manual progamming
1
Tune to your desired radio station (refer to
“Tuning to radio stations”).
2
Press
PROGRAM
on the remote.
➜
”
PROG
” icon flashes.
3
Press
PRESET
+ or
PRESET-/
9
(or
¡
/
™
on
the remote control) to select the desired preset
number.
➜
If “
PROG
” icon goes off before you select the
desired preset number, press
PROGRAM
on
the remote.
4
Press
PROGRAM
on the remote again to
store the radio station.
●
Repeat steps 1-4 to store other radio stations.
Other Functions
Listening to preset radio stations
●
In tuner mode, press
PRESET
+ or
PRESET-/
9
(or
¡
/
™
on the remote control) to select
the desired preset number.
➜
The preset number, radio frequency, and
waveband are displayed.
RDS
Radio Data System
is a ser vice that allows
FM stations to show additional information. If
you are receiving a RDS station,
and the
station name are displayed.
When automatic programming is used, RDS
stations will be programmed first.
Scrolling through different RDS
information
●
Press
RDS
briefly and repeatedly to scroll
through the following information (if available):
– Station name
– Radio text messages
– Frequency
Setting the RDS clock
Some RDS radio station may be transmitting a
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
1
Tuned to an RDS station from FM band (refer to
“Tuning to radio stations”).
2
Press and hold
RDS
for more than two seconds.
3
Press
RDS
again.
➜
"
SEARCH TM
" is displayed.
➜
When RDS time is read, “RDS” and RDS time
time value are displayed and the current time
will be stored.
Note:
– Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the
transmitting RDS radio station.
pg 001-042_MCD716_12_Eng
2010.6.23, 17:11
34
