English
31
Radio Reception
Tuning to radio stations
1
Press
STANDBY-ON
B
to switch on the last
selected source.
2
Press
SOURCE
(
TUNER
on the remote) to
select TUNER (FM) mode.
3
Press and hold
¡1
/
2™
on the system (or
2
/
3
on the remote control) until the frequency
indication starts to change, then release.
➜
The system automatically tunes to the next
strong radio station.
●
To tune to a weak station, press
¡1
/
2™
on the
system (or
2
/
3
on the remote control) briefly
and repeatedly until an optimal reception is
found.
4
Repeat Step 3 if necessary until you find the
desired radio station.
Presetting radio stations
You can preset up to 20 stations regardless of
the reception.
Automatic programming
●
Press
PROGRAM
on the remote control for
more than two seconds to activate
programming.
➜
All available stations are programmed.
Manual programming
1
Tune to your desired radio station (refer to
“Tuning to radio stations”).
2
Press
PROGRAM
on the remote.
➜
”
PROG
” icon flashes.
Other Functions
3
Press
PRESET
+
/-
(or
¡
/
™
on the remote
control) to select the desired preset number.
➜
If “
PROG
” icon goes off before you select the
desired preset number, press
PROGRAM
on
the remote.
4
Press
PROGRAM
on the remote again to
store the radio station.
●
Repeat steps 1-4 to store other radio stations.
Listening to preset radio stations
●
In tuner mode, press
PRESET
+
/-
(or
¡
/
™
on
the remote control) to select the desired preset
number.
➜
The preset number, radio frequency, and
waveband are displayed.
Setting the clock
1
In Standby mode, press and hold
CLOCK
on
the remote control until the time flashes on the
display.
➜
”
CLOCK SET
” is displayed briefly. Then, the
hour digits flash on the display screen.
2
Turn
VOLUME -/+
clockwise or anticlockwise
or press
VOL +/-
on the remote to set the
hours.
3
Press
CLOCK
to confirm.
➜
The minute digits flash on the display screen.
4
Turn
VOLUME -/+
clockwise or anticlockwise
or press
VOL +/-
on the remote to set the
minutes.
5
Press
CLOCK
again to confirm the clock
setting.
Notes:
– This system only supports 24-hour mode.
– The clock setting will be erased when the
system is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 30 seconds.
pg 020-039_MCD710B_93_Eng
2008.2.26, 13:35
31
