36
English
Clock/Timer
Clock setting
See "Preparations-Step 2: Setting the clock".
Timer setting
●
The system can be used as an alarm clock,
whereby the last selected source is switched on
at a set time (one time operation). The clock
time needs to be set first before the timer can
be used.
1
In standby mode, press and hold
SLEEP/
TIMER
on the remote control for more than
three seconds.
➜
"
SET TIMER
" is displayed briefly. Then, the
hour digits flash on the display panel.
2
Turn the
VOLUME -/+
control on the front
panel or press
VOL +/-
on the remote to set
the hours and press
SLEEP/TIMER
to
confirm.
➜
The minute digits flash on the display panel.
3
Turn the
VOLUME -/+
control on the front
panel or press
VOL +/-
on the remote to set
the minutes and press
SLEEP/TIMER
to
confirm.
➜
"
ON
" or "
OFF
" flashes.
4
Turn the
VOLUME -/+
control on the front
panel or press
VOL +/-
on the remote to
activate or deactivate the timer and press
SLEEP/TIMER
to complete the setting.
➜
Display shows
if activated, and disappears
if deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1
In active mode, press
SLEEP/TIMER
on the
remote control repeatedly to select a preset
time.
➜
The selections are as follows (time in
minutes):
SLEEP OFF
™
SLEEP 10
™
SLEEP 20
™
SLEEP 30
™
SLEEP 40
™
SLEEP 50
™
SLEEP 60
™
SLEEP 70
™
SLEEP 80
™
SLEEP 90
™
SLEEP OFF
2
When you reach the desired length of time, stop
pressing the
SLEEP/TIMER
button.
To deactivate the sleep timer
●
Press
SLEEP/TIMER
repeatedly until "
SLEEP
OFF
" is displayed, or press
ECO POWER/
STANDBY ON
y
(or
y
on the remote)
.
pg001-pg040_MCD296-22-Eng
2007.1.21, 17:30
36
