22
9 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, USB or TUNER is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold
TIMER
.
3
Press
DISC
,
TUNER
or
USB
to select a
source.
4
Press
TIMER
to confirm.
The hour digits are displayed and begin
»
to blink.
5
Press / to set the hour.
6
Press
TIMER
to confirm.
The minute digits are displayed and
»
begin to blink.
7
Press / to set the minute.
8
Press
TIMER
to confirm.
The timer is set and activated.
»
Activate and deactivate alarm timer
1
Press
TIMER
repeatedly to activate or
deactivate timer.
If timer is activated, the display shows
»
.
If timer is deactivated,
»
disappears on
the display.
Tip
Alarm timer is not available in MP3 LINK
•
mode.
If DISC/USB source is selected and the
•
track cannot be played, tuner is activated
automatically.
Select sampling rate
You can select the Linear Pulse Code
Modulation (LPCM) output sampling rate. The
higher the sampling rate, the better the sound
quality.
1
Press
SYSTEM MENU
.
2
Select
[AUDIO SETUP]
(audio setup) >
[DOWN SAMPLE]
(down sample), then
press .
3
Select an option, then press
OK
.
[
•
48K]
: For discs recorded at sampling
rate of 48kHz.
[
•
96K]
: For discs recorded at sampling
rate of 96 kHz.
[
•
192K]
: For discs recorded at
sampling rate of 192 kHz.
4
Press
SYSTEM MENU
to exit.
Enable night mode
Night mode makes loud sound level softer so
that you can watch the DVD movies at a low
volume, without disturbing others.
1
Press
SYSTEM MENU
.
2
Select
[AUDIO SETUP]
(audio setup)
> [
NIGHT MODE]
(night mode), then
press .
3
Select an option , then press
OK
.
•
[ON]
(on): Enjoy quiet viewing at
night.
•
[OFF]
(off): Enjoy surround sound
with its full dynamic range.
4
Press
SYSTEM MENU
to exit.
EN
MCD107_93_UM_V2.0.indb 22
7/14/2011 3:31:38 PM