English
29
Problem
Solution
Left and right sound outputs are
reversed.
The remote control does not function.
The timer is not working
The Clock/Timer setting is erased
Unable to select Progressive Scan.
No sound is output from the HDMI jack.
Some files on the USB device are not
displayed.
“
DEVICE NOT SUPPORTED
” scrolls on the
display.
✔
Check the speaker connections and location.
✔
Point the remote control at the remote control
sensor of the unit.
✔
Reduce the distance to the player.
✔
Remove any possible obstacles.
✔
Replace the battery with a new one.
✔
Check that the battery is loaded correctly.
✔
Set the clock correctly.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔
Check that the output of the video signal is
switched to 'Pr/Cr Pb/Cb Y'.
✔
Check the connection between the TV and the
HDMI jack of the DVD player.
✔
See if the TV suppor ts this 480p/576p/720p/
1080i DVD player.
✔
Check your TV system setup correctly.
✔
Check if the number of folders exceeds 99 or
the number of titles exceeds 999.
✔
Remove the USB mass storage device or select
another source.
Troubleshooting
pg017-pg029_MCD268_93
2008.3.10, 14:44
29
