23
English
MC-V320/21-1
General information on
recording
●
Recording is permissible insofar as copyright or
other rights of third parties are not infringed.
●
For recording, use only NORMAL (IEC type I)
tapes on which the tabs have not yet been
broken. This deck is not suited for recording on
METAL (IEC IV) type tapes.
●
The best recording level is set automatically.
Altering the VOLUME, DBB or INTERACTIVE
SOUND controls will not affect the recording in
progress.
●
At the very beginning and end of the tape, no
recording will take place during the 7 seconds
when the leader tape passes the recorder heads.
●
To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.
Synchro start CD recording
1
Select
CD
source.
2
Insert a disc and if desired, program track
numbers.
3
Press to open the tape door.
4
Insert a suitable tape into the deck and close the
tape door.
5
Press
REC
to start recording.
➜
REC
is shown during recording.
➜
Playing of the CD program starts
automatically from the beginning of the CD
after 7 seconds. It is not necessary to start the
CD player separately.
6
To stop recording, press
STOP
9
.
Recording from the radio
1
Select TUNER source and tune to the desired
radio station (see “Tuning to radio stations”).
2
Press to open the tape door.
3
Insert a suitable tape into the deck and close the
tape door.
4
Press
REC
to start recording.
➜
REC
is shown during recording.
5
To stop recording, press
STOP
9
.
Recording from Aux
1
Select
AUX
source.
2
If necessary, prepare the additional appliance for
recording.
3
Press
REC
to start recording.
➜
REC
is shown during recording.
4
To stop recording, press
STOP
9
.
Recording timer
To record from the radio, you will need to use a
preset radio station and to set a start (ON) and
finish (OFF) time.
1
Insert a suitable tape into the deck.
➜
If desired, press
PROG/ REV
to select tape
reverse mode option.
PLAY 1 SIDE
: for recording one side only
PLAY A AND B
: for recording on both sides
REPEAT A AND B : for recording on both sides
2
Select
TUNER SOURCE
and the preset radio
station to record from.
3
Press
STANDBY ON
to switch the system to
standby mode. Press
TIMER SET /
for more
than 2 seconds.
➜
flashes and a source is displayed.
4
Press
SOURCE
repeatedly, until
REC TUN
source is displayed.
5
Press
TIMER SET /
to confirm the source.
➜
SET ON TIME
is displayed,
and the clock
digits for the hours flash.
6
Press
VOLUME
–/+ to set the hours.
7
Press
TIMER SET /
again.
➜
The clock digits for the minutes flash.
8
Press
VOLUME
–/+ to set the minutes.
9
Press
TIMER SET /
to confirm the ON start
time.
➜
SET OFF TIME
is displayed,
and the
clock digits for the hours flash.
10
Repeat steps
6-8
to set the finish time.
11
Press
TIMER SET /
to confirm the timer
settings.
➜
is shown and the recording timer is now
set.
Tape Operation/Recording
Summary of Contents for MC-V320
Page 1: ...1 Micro Hi Fi System MC V320 MC V320 ...
Page 3: ...3 3 2 3 1 8 6 4 5 7 9 0 ...
Page 4: ...4 º ª ...
