MC-M350/22-1
14
English
Radio Reception
Tuning to radio stations
1
Select
TUNER
source.
➜
TUNER
is displayed briefly.
2
Press
BAND
(or
DISPLAY
on remote
control) once or more to select your waveband
(FM/ MW/ LW).
3
Press down
TUNE
or
and release
button.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning:
SEARCH
.
➜
If a FM station is received in stereo,
is
shown.
4
Repeat step
3
if necessary until you find the
desired station.
●
To tune to a weak station, press
TUNE
or
briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only program
stations which are not in the memory already.
1
Press
PRESET
or
to select the preset
number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press
PROG/ REV
(
PROGRAM
on remote
control) for more than 2 seconds to activate
programming.
➜
AUTO
is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by MW, LW. The last
preset automatically stored will then be played.
Manual programming
1
Tune to your desired station (see “Tuning to
radio stations”).
2
Press
PROG/ REV
(
PROGRAM
on remote
control) to activate programming.
3
Press
PRESET
or
to allocate a number
from 1 to 40 to this station.
4
Press
PROG/ REV
(
PROGRAM
on remote
control) again to confirm the setting.
➜
The preset number and the frequency of the
preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
