Philips MBD7020, User Manual, Page: 21 / 42

21
4
Read the on-screen instructions and
press OK to select [Continue] .
The product scans and displays the
»
valid devices.
5
Press OK to select [Continue] .
Select a connected device on the left of
the menu, then press .
6
Select the connector that is used for the
device, then press OK .
Repeat steps 6~7 to map other
»
devices.
7
Press to exit the menu.
Update audio mapping from
connected devices
If you have already mapped audio from
connected devices, you can use this procedure
to update your mapping.
1
Press , select [Settings] , then press OK .
2
Select [EasyLink Setup] > [Audio Input
Mapping] , then press OK .
3
Select a connected device then press .
4
Select the AUX input, and then press
OK .
Note
Philips does not guarantee interoperability with all
•
HDMI CEC devices.
AUX
Philips TV
DVD player
Recorder
–
One-touch play
1
Press (standby) to turn on this product.
The TV (if the TV supports one-
»
touch play) automatically turns on
and switches to the correct video-in
channel.
If a disc is loaded in this product, disc
»
play automatically starts.
One-touch standby
1
Press and hold (standby) for more than
3 seconds.
All the connected devices (if the
»
device supports one-touch standby)
automatically switch to standby.
Map the devices to the audio inputs
Note
Before you start, ensure that the audio output of
•
the HDMI TV and other HDMI devices have been
connected to the audio input jacks on this product.
1
Press , select [Setup] , then press OK .
2
Select [EasyLink Setup] , then press .
• [One Touch Play] and [One Touch
Standby] functions are turned on by
default.
3
Select [System Audio Control] > [On] .
One Touch Play
EasyLink
One Touch Standby
System Audio Control
Audio Input Mapping
On
On
On
Off
Advanced
Preference
Video Setup
Audio Setup
Network Setup
EasyLink Setup
EN