background image

8

Connection diagrams

See Connect Peripheral Equipment, p. 24.

Install TV Setup

&

Use the cursor in the up/down, left/right direction to select the menu item.

é

Use the 

OK

key in the centre of the cursor to activate.

Use the red 

®

key to return or switch menu off.

Store Personal Preferences

The adjustments of Contrast, Brightness, Colour, Tint, Digital Scan of Digital
options and Dynamic Contrast made in the picture menu and the adjustments
of Volume, Graphic Equalizer and Loudness made in the sound menu can be
stored in memory for all the TV channels.

DVD

See Connect Peripheral Equipment, TV and a DVD, p. 25.

Define Decoder/Descrambler programme numbers

If you have connected a decoder or a descrambler, see p. 24, you can define
one or more programme numbers as decoder programme numbers.

Press the cursor left/right to select 

Off

EXT1

or 

EXT2

, the euroconnector

where you connected your decoder. 

Select 

Off

if you do not want the selected programme number being activated

as a decoder programme number.

Select 

EXT2

when the decoder is connected to your EasyLink video recorder.

When selecting the decoder, the message 

EasyLink: Downloading Presets....

appears on the screen.

Picture Tilt  

(only for 32” or 82 cm sets)

Select 

Picture Tilt

with the cursor up/down. 

Keep the cursor left/right pressed to adjust the rotation of the picture.

Information Line

After the selection of a TV programme or after pressing the 

i

key on the

remote control, a TV channel which broadcasts teletext may transmit the name
of the TV channel or the programme name or another message which appears
briefly in the information line on the screen.
When selected 

Off

, the information line will only appear after pressing the 

i

key, and not after the selection of a TV channel.

Ext2 Input  

(only for 32” or 82 cm sets)

See Connect Peripheral Equipment, p. 24.

VCR Type  

(only for 32” or 82 cm sets)

See Connect Peripheral Equipment, p. 24. 

Auto Picture/Sound  

(if provided)

When switched 

On

, the picture- and soundstyle are automatically selected

depending on the transmitted programme theme. See also 

NEX

TV

IEW

, p. 18.

If a theme is transmitted that is not in the list of the theme-picturestyle, then
the 

personal 

style will be chosen. See Smart Controls keys, p. 11.

INSTALLATION  

Menu Language
Country

Automatic Installation
Manual Installation
Give Name
Reshuffle
Favourite Programmes

Connection diagrams

SETUP

J

SETUP

SETUP

Store Pers. Pref.
DVD
Decoder/Descrambler
(Picture tilt)
Information Line
(Ext2 Input)
(VCR Type)
Surround Sound        Off/Channel 1...7
(Auto Picture/Sound              On/Off)

NEX

TV

IEW

Provider          

None/0.99

Auto Format

Yes/No

INSTALLATION

J

Store Pers. Pref.

Decoder/Descrambler

Programme
Decoder Status

J

Programme

4807.1 gb  19-02-1999  12:15  Pagina 8

Summary of Contents for MATCHLINE 32PW9723/12
































Reviews: