13
Use of the menus
Surround settings menu
Select
Surround settings
in the Sound menu.
With no extra loudspeakers connected
Do not change the predefined factory settings of Extra front or rear speakers in the
Setup menu, p. 7.
Note: you can select only those surround modes which can be used with the
broadcasted signal.
The graphical representation of the TV speakers is displayed and updated
according to the selected surround mode. Speakers which are active are
highlighted.
3D surround mode, which enables you to experience the effect of Dolby
Surround Pro Logic, is represented by the symbol
®r
.The menu item
3D effect appears in which the level of the 3D effect can be selected.
Adjustment of the volume level of the loudspeakers
The menu item
Test
which only appears in Dolby 3 Stereo and 3D Surround
mode, enables you to have a reference of the loudness of the internal
loudspeakers.
&
Select
Dolby 3 Stereo
or
3D Surround
.
é
Select
Test start
and press the OK key.
A steady noise tone is switched sequentially through the loudspeakers.The
loudspeakers activated light up in the screen graphic.
“
Select
Centre volume
or
Balance
and alter the selected adjustment.
‘
Select
Test stop
and press the OK key when you have finished the
adjustment of the speaker levels.
Surround mode
Select the Surround Sound mode according to the sound mode being
broadcast.
3D Surround
(optimal with Dolby Surround broadcasting)
3D Surround enables you to experience the effect of Dolby Surround Pro
Logic without the need of having rear speakers connected.
The graphical representation of the rear loudspeakers is replaced by the
symbol
®r
.
Select the level of
3D effect
with the cursor left/right.
Dolby 3 Stereo
(optimal with Dolby Surround broadcasting)
The sound signal is now distributed over the front left, the front right and the
centre loudspeaker.
Stereo
This mode reproduces only the left and right front sound signals.
You only hear a stereo sound if the broadcast which you are receiving is
transmitted in stereo or digital sound.
Press the
Ï
key to return to the
SOUND
menu.
Go on with page 16.
Dolby 3 Stereo
Surround settings
Test start
Test stop
Centre volume
Balance
3D effect
Surround mode
•
•
•
•
•
•
•
•
•
•
•
•
•
Available menu items in case of the selected
and available Surround modes.
Stereo
3D surround
Surround settings
Test start
Test stop
Centre volume
Balance
3D effect
Surround mode
‘Dolby’ ‘Pro Logic’ and the double-D symbol
are
trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories
Licensing Corporation.
*
3D Surround
Dolby 3 Stereo
Stereo
