6
EN
Prepare the remote control
Caution
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
•
Batteries contain chemical substances and should be
disposed of properly.
To insert the remote control batteries:
1
Open the battery
compartment.
2
Insert the supplied 2
AAA batteries with
correct polarity (+/-)
as indicated.
3
Close the battery
compartment.
Power on
Press .
»
When the unit is turned on, it is tuned
to the last selected source.
To switch to standby mode, press again.
»
The display panel is dimmed.
»
The time and date (if set) are displayed.
Note
•
If the system is idle for 15 minutes, the radio will switch
to standby mode automatically.
To switch to the main display:
1
Press
.
»
The display panel will show as below:
2
Press the navigation buttons to choose the
menu options.
Perform initial setup
Follow the instructions below to configure
some basic settings.
To listen to the internet radio, you need to set
up a Wi-Fi connection first. Wi-Fi Protected
Setup (WPS) is a standard created by Wi-
Fi Alliance for easy establishment of secure
wireless home networks. If your wireless router
supports WPS, you can quickly and securely
connect the radio to the router through
one of the two setup methods: Push Button
Configuration (PBC), or Personal Identification
Number (PIN).
For those that do not support WPS, you have
another option to connect the radio to the
wireless router.
Note
•
Before you connect to a network, familiarize yourself
with the network router.
•
Make sure that your home Wi-Fi network is enabled.
1
When the product is powered on for the
first time, the display will show up.
