6 EN
3 Get started
Connect the radio antenna
Connect power
Prepare the remote control
Caution
Always follow the instructions in this chapter
in sequence.
If you contact Philips, you will be asked for the
model and serial number of this speaker. The
model number and serial number are on the
back of the speaker. Write the numbers here:
Model No. ________________________
Serial No. ________________________
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Place your product
Before you place this product on the table,
attach the supplied table stand to the main
unit, as illustrated below.
Tip: See the attached wall mounting sheet for how
to mount this product onto wall.
Connect the supplied radio antenna to this product
before listening to radio
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
• Risk of electric shock! Before you plug the AC power
adaptor, make sure that the adaptor plug converter is
fixed securely. When you unplug the AC power adaptor,
always pull the plug, never the cord.
• Before you connect the AC power adaptor, make sure
that you have completed all the other connections.
Caution
Connect the power cable to the wall socket.
To insert the remote control battery:
1
.
Open the battery compartment.
2. Insert the supplied AAA battery
with correct polarity (+/-) as
indicated.
3. Close the battery compartment.
• Risk of product damage! When the remote control
is not used for long periods, remove the batteries.
• Batteries contain chemical substances, so they
should be disposed of properly.
Caution
