Philips Lumea SC1995, Manual

Page: 18 / 214

8 To make sure that you have treated all areas, release the flashes close to
each other. Effective light only comes out of the light exit window,
therefore there should be some overlap. However, make sure you flash
the same area only once. Flashing the same area twice doesn't improve
the effectiveness of the treatment, but increases the risk of skin reactions.
9
When you have finished the treatment, press and hold the on/off button
for 2 seconds to switch off the device.
Treatment modes: Stamp & Flash and Slide & Flash
Philips Lumea has two treatment modes for more convenient use on
different body areas:
- The Stamp & Flash mode (available for SC1995, SC1993) is ideal to treat
small or curvy areas like knees and underarms. Simply press and
release the flash button to release a single flash.
- The Slide & Flash mode (only available for SC1995) offers convenient use
on larger areas like legs. Keep the flash button pressed while you slide
the device over your skin to release several flashes in a row.
Recommended treatment schedule
Initial phase
For the first 4 to 5 treatments, we advise you to use Philips Lumea once
every two weeks to ensure that all hairs are treated.
Touch-up phase
After the initial treatment phase (4-5 treatments), we recommend touch-ups
every 4 to 8 weeks, when you see hairs growing back. This is to maintain
results and enjoy smooth skin for months. The time between treatments
may vary based on your individual hair regrowth and also across different
body areas.
18
English