Philips LTC 3963/51 Instructions For Use Manual Download

Page: 39 / 64

PHILIPS LTC3963/61 (E) QR31808

29
28
27

21 22

20. EJECT BUTTON

Press to remove the cassette. The EJECT button will
not operate in the RECORD mode.

21. FIELD REVERSE BUTTON

Press to reverse the tape by one field in the STILL
playback mode.

22. STILL BUTTON

Press to momentarily stop tape motion in the play
mode. The STILL function allows close inspection of
individual scenes. See the description of STILL play-
back on page 22.

23. FIELD ADVANCE BUTTON

Press to advance the tape one field in the STILL play-
back mode.

24. RECORD BUTTON

Press to start recording.

25. STOP BUTTON

Press to stop the tape. The STOP button must be
pressed to end the RECORD and PLAY mode.

26. PLAY BUTTON

Press to play recorded material in the forward direc-
tion. Pressing this during recording makes it possible
to check recordings.

27. REVERSE PLAY BUTTON

Press to play recorded material at the 06, 72, 120, 168
or 240 speed in the reverse direction during the PLAY
mode.

28. FAST FORWARD/VISUAL SEARCH BUTTON

Press to activate fast forward.
Press this button during playback and a forward play-
back picture at high speed can be seen.

29. REWIND/VISUAL SEARCH BUTTON

Press to start rewind.
Press this button during playback and a reverse play-
back picture at high speed can be seen.

Summary of Contents for LTC 3963/51

































































Search results

Summary of Contents for LTC 3963/51

Reviews:

Related manuals for LTC 3963/51

Brands by name

Popular brands

Philips LTC 3963/51, Instructions For Use Manual

Search results

Summary of Contents for LTC 3963/51

Reviews:

Related manuals for LTC 3963/51

Brands by name

Popular brands