4.2 Take off the housing cover together
with dome bubble; then separate
housing cover& dome bubble.
4.3 Mount the "ring" onto "housing cover";
then "ring + housing cover" onto the
"housing base" accordingly. Secondly
install the metal bracket and fasten it by
using supplied four (4) screws. Finally
snap 2 supplied sheet spring into the
chosen hole of bracket based on the
thickness of ceiling.
Note:
User has to adjust the
mounting height of sheet spring
according to different thickness of
ceiling in order to ensure perfect
secured mounting mechanism as
the below drawing and table.
1.8
push
ltc1132_ii_03081_99-44_Multi-Eng.qxd 11/8/99 9:57 AM Page 1.8
