background image

IMPORTANT SAFEGUARDS

1. Read Instructions - All the safety and operating instructions should

be read before the unit is operated.

2. Retain Instructions - The safety and operating instructions should be

retained for future reference.

3. Heed Warnings - All warnings on the unit and in the operating

instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be

followed.

5. Cleaning - Unplug the unit from the outlet before cleaning.  Do not

use liquid cleaners or aerosol cleaners.  Use a damp cloth for clean-
ing.

6. Attachments - Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this unit near water - for exam-

ple, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet
basement, near a swimming pool, in an unprotected outdoor installa-
tion, or any area which is classified as a wet location.

8. Accessories - Do not place this unit on an unstable stand, tripod,

bracket, or mount.  The unit may fall, causing serious injury to a per-
son and serious damage to the unit.  Use only with a stand, tripod,
bracket, or mount recommended by the manufacturer, or sold with
the product.  Any mounting of the unit should follow the manufac-
turer’s instructions, and should use a mounting accessory recom-
mended by the manufacturer.
An appliance and cart combination should be moved with
care.  Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.

9. Ventilation - Openings in the enclosure, if any, are provided for venti-

lation and to ensure reliable operation of the unit and to protect it
from overheating.  These openings must not be blocked or covered.
This unit should not be placed in a built-in installation unless proper
ventilation is provided or the manufacturer’s instructions have been
adhered to.

10. Power Sources - This unit should be operated only from the type of

power source indicated on the marking label.  If you are not sure of
the type of power supply you plan to use, consult your appliance
dealer or local power company.  For units intended to operate from
battery power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This unit may be equipped with a polar-

ized alternating-current line plug (a plug having one blade wider than
the other).  This plug will fit into the power outlet only one way.
This is a safety feature.  If you are unable to insert the plug fully into
the outlet, try reversing the plug.  If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet.  Do not
defeat the safety purpose of the polarized plug.
Alternately, this unit may be equipped with a 3-wire grounding-type
plug, a plug having a third (grounding) pin.  This plug will only fit into
a grounding-type power outlet.  This is a safety feature.  If you are
unable to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet.  Do not defeat the safety purpose of
the grounding-type plug.

2

Summary of Contents for LTC 0140














Reviews: