Record
9
Table of contents
5
Record
Please note the instructions in this section when you make the first
recording with your Voice Tracer!
Record with the built-in microphone
1
Press the
INDEX
/
a
button while the recorder is stopped to
select the desired folder.
2
Press the
g
button to start recording.
• The record / play indicator lights red.
• Point the built-in microphone toward the sound source.
3
To pause recording, press the
g
button.
• The record / play indicator will blink, and PAUSE will flash on the
display.
4
Press the
g
button again to resume recording.
5
To stop recording, press the
j
/
DEL
button.
D
Notes
• Set the desired voice activation function and recording mode before
starting recording (see
chapter 8, Customize settings on page 15
for
more information).
• Make a test recording to make sure that the Voice Tracer settings are
correct. You can monitor the recording quality while recording via
the headphones.
• Press and hold
f
during recording to display the remaining
recording time.
• Press
b
during recording to create a new file.
• The maximum number of files in each folder is 99, for a total capacity
of 396 files (99 files x 4 folders).
• If the recording time exceeds the available capacity or the number of
files reaches 396, recording stops and
FULL
will be displayed.
Delete a few recordings or move them to a computer.
• Do not remove the battery when recording is in progress. This can
cause the unit to malfunction.
• To record without draining the battery, connect the Voice Tracer to
a computer using the USB cable. Press the
g
button for one
second or longer to start recording. Use the headphones for
playback of your recording.
• If you are to start a long recording session, replace the batteries
before you begin.
