ATTENTION: Install in accordance with national and local building and electrical codes.
!
Page 1
Mount Spacing & Power Feed Location
TruGroove Perimeter modules are designed for exact on-grid mounting. 2 mount-
ing and 2 power feed locations are available on each module. Refer to layout draw-
ings or row configuration documents for module lengths and mounting distances.
On Grid End Set
On-grid endplate left (x1)
On-grid endplate right (x1)
#8 sheet metal screws (x6)
System Overview
These instructions review how to install TruGroove Perimeter Ambient and Graze fixtures. Modules can be installed as individual
standalone units, or they can be joined together to create continuous runs. The graphics below show the components required to
install a typical run of TruGroove Perimeter fixtures. IMPORTANT: Read all instructions before beginning installation.
Tools Required:
Grid Panel Kit
Grid panel (x1)
Grid clips (x2)
#8 sheet metal screws (x3)
Joiner Kit
Joiner bracket (x1)
Biscuit aligners (x2)
#8 sheet metal screws (x2)
Variable End Set
Variable endplate left (x1)
Variable endplate right (x1)
Variable panels (x2)
On-grid end caps (x2)
Grid clips (x2)
#8 sheet metal screws (x8)
Phillips Screwdriver
#2 Robertson Screwdriver
Wall Rail
