Mechanical Instructions
4.
–
Loudspeaker connections on speakers.
4.
Remove all T10 parker screws around the frame (2).
5.
Remove the two T10 tapping screws that hold the SSB (3).
6.
Remove the four T25 screws (4) that hold the plasma
panel.
7.
Lift the (gold coloured) plastic frame together with its PWBs
(except the Audio Panel) from the PDP panel.
8.
Now the PDP (incl. the PSU and driving panels) can be
removed.
9.
Before sending the plasma panel to the NSO for repair or
exchange, remove all its panels.
Assembly
In order to centre the (new) plasma panel correctly w.r.t. the
glass plate, do the following:
1.
Place the (new) plasma panel face down on foam bars.
2.
Also, place the front assy (front panel with glass plate) on
two other foam bars.
3.
Mount the plastic frame on the plasma panel.
4.
Lift the assy (frame and PDP), and place it into the front
assy.
5.
Now follow the above described disassembly process in
reverse order.
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See figure "Cable
dressing".
•
Pay special attention not to damage the EMC foams at the
SSB shields. Control that EMC foams are put correctly on
their places.
