
Alignments
8.
–
When UK PNP and VIRGIN MODE are set to “1” at the
initial setup and after exiting from menu, VIRGIN
MODE will be set automatically to “0” while UK PNP
remains “1”.
•
OB11: VIRGIN MODE
–
0 : Virgin mode is disabled or not applicable.
–
1 : Virgin mode is enabled. Plug and Play menu item
will be displayed to perform installation at the initial
startup of the TV when VIRGIN MODE is set to “1”.
After installation is finished, this option bit will be
automatically set to “0”.
•
OB10: CHINA
–
0 : Tuning is not for China set, or this option bit is not
applicable.
–
1 : Tuning is for China set.
Option Byte 2 (OP2)
•
OB27: SC
–
0 : Soft clipping is disabled.
–
1 : Soft clipping is enabled.
•
OB26: GREEN UI
–
0 : Green UI is disabled (for Philips brand).
–
1 : Green UI is enabled (for Magnavox brand).
–
Note: only for NAFTA region.
•
OB25: CHANNEL NAMING
–
0 : Name FM Channel is disabled or not applicable.
–
1 : Name FM Channel is enabled.
–
Note : Name FM channel can be enabled only when
FM RADIO= “1”.
•
OB24: LTI
–
0 : Luminance Transient Improvement (LTI) is disabled
or not applicable.
–
1 : LTI is enabled.
•
OB23: TILT
–
0 : Rotate Picture is disabled or not applicable.
–
1 : Rotate Picture is enabled.
•
OB22: FINE TUNING
–
0 : Fine Tuning for Channel Offset is disabled or not
applicable.
–
1 : Fine Tuning for Channel Offset is enabled.
•
OB21: PIP PHILIPS TUNER
–
0 : ALPS / MASCO compatible tuner is in use for PIP
module.
–
1 : Philips compatible tuner is in use for PIP module.
•
OB20: HUE
–
0 : Hue/Tint Level is disabled or not applicable.
–
1 : Hue/Tint Level is enabled.
Option Byte 3 (OP3)
•
OB37: EW FUNCTION
–
0 : EW function is disabled. In this case, only Expand
4:3 is allowed, Compress 16:9 is not applicable.
–
1 : EW function is enabled. In this case, both Expand
4:3 and Compress 16:9 are applicable.
•
OB36: 2 TUNER PIP
–
0 : Software selection no PIP
–
1 : Software selection with PIP
–
Note: Only for EU/AP region for sets with PIP.
•
OB35: PIP SPLITTER
–
0 : Normal Tuner in PIP
–
1 : Splitter in PIP
–
Note: Only for EU/AP region. For PIP sets and build in
with Splitter in PIP tuner.
•
OB34: SPLITTER
–
0 : Normal Tuner for main chassis
–
1 : Splitter Tuner for main chassis
–
Note: Only for EU/AP region.
•
OB33: VIRTUAL DOLBY
–
0 : Virtual Dolby is not applicable.
–
1 : Virtual Dolby is applicable.
•
OB32: WIDE SCREEN
–
0 : Software is used for 4:3 sets or not applicable.
–
1 : Software is used for 16:9 sets.
•
OB31: WSSB (EU)
–
0 : WSSB is disabled or not applicable.
–
1 : WSSB is enabled.
–
Note : This option bit can be set to “1” only when WIDE
SCREEN= “1”.
•
OB30: ECO SUBWOOFER
–
0 : Feature is disabled or not applicable.
–
1 : Feature is enabled.
Option Byte 4 (OP4)
•
OB47: Reserved
–
Default setting is “0”.
•
OB46: Reserved
–
Default setting is “0”.
•
OB45: ULTRA BASS
–
0 : Ultra Bass is disabled or not applicable.
–
1 : Ultra Bass is enabled.
–
Default setting is “0”.
•
OB44: DELTA VOLUME
–
0 : Delta Volume Level is disabled or not applicable.
–
1 : Delta Volume Level is enabled.
•
OB43: Reserved
–
Default setting is “0”.
•
OB42: VOLUME LIMITER
–
0 : Volume Limiter Level is disabled or not applicable.
–
1 : Toggle Volume Limiter Level is enabled.
•
OB41: Reserved
–
Default setting is “0”.
•
OB40: STEREO NICAM 2CS
–
0 : For AV Stereo.
–
1 : For NICAM Stereo 2CS.
Option Byte 5 (OP5)
•
OB57: AV1
–
0 : AV1 source is not present.
–
1 : AV1 source is present.
•
OB56: AV2
–
0 : AV2 source is not present.
–
1 : AV2 source is present.
–
Note : For EU, when AV2=“1”, both EXT2 and SVHS2
should be included in the OSD loop.
•
OB55: AV3
–
0 : Side/Front AV3 source is not present.
–
1 : Side/Front AV3 source is present.
•
OB54: CVI
–
0 : CVI source is not available.
–
1 : CVI source is available.
•
OB53: SVHS2
–
0 : SVHS2 source is not available.
–
1 : SVHS2 source is available.
–
Note : This option bit is not applicable for EU.
•
OB52: SVHS3
–
0 : SVHS3 source is not available.
–
1 : SVHS3 source is available.
–
Note : This option bit is not applicable for EU.
•
OB51: HT MODE
–
0 : Hotel mode is disabled or not applicable.
–
1 : Hotel mode is enabled.
•
OB50: Reserved
–
Default setting is “0”.
Option Byte 6 (OP6)
•
OB67: PERSONAL ZAPPING
–
0 : Personal Zapping feature is disabled or not
applicable.
–
1 : Personal Zapping feature is enabled.
•
OB66: Reserved
–
Default setting is “0”.
•
OB65: FM TRAP
–
0 : FM Trap is not present.
–
1 : FM Trap is present.
–
Note: Only for LATAM region.
•
OB64: COMBFILTER
–
0 : 3D-combfilter is not present.
–
1 : 3D-combfilter is present.
www.freeservicemanuals.info
Summary of Contents for L04A AB
