Philips L Line 31BDL7331L, User Manual

Page: 25 / 51

31BDL7331L
23
The 16th digit of the serial number corresponds to the position code of the module. Follow the ascending alphabetical order to
install the module to correct position. Refer to the diagram
below on the proper order of installing the modules.
To install the module to the hub board, the flat cable that connects between them has to be properly wired. One end of the flat
cable is already attached to the hub board, use the other end to connect it to the module. Before connection, make sure that
the arrow sign on the module is pointing up. Connect the flat cable to the connector on the module until it clicks into place. To
prevent reversed connection when connecting the cable, locate the star sign on the module first. Ensure that the star sign and the
red stripe on the cable match up (refer to the diagram below.)
1 2 3
1
2
3
Module #:
31Rxxxxxxx
C0001
A
xxxxxxx
Module #:
31Rxxxxxxx
C0001
B
xxxxxxx
Module #:
31Rxxxxxxx
C0001
C
xxxxxxx