7
EN
6 Product
information
Note
• Product information is subject to change without
prior notice.
General information
Power supply
5V
3A
Built-in Lithium battery
7.4V, 4400mAh
USB port
5V
2A
Dimensions (W x H x D)
299 x 98 x 100 mm
Weight (main unit)
1.065 kg
Amplifier
Output power
10W x 2
Frequency response
100 Hz - 20 kHz
Signal to noise ratio
> 70 dB
Speakers
Impedance 4Ω
Maximum input power
10 W
Size 2.25"
Bluetooth
Bluetooth version
5.0
Frequency range
2402 - 2480 MHz
Maximum transmition power
5dBm
Compatible Bluetooth profiles
A2DP, AVRCP
Bluetooth range
approx. 20m
7 Troubleshooting
Warning
• Never remove the casing of the speaker.
To keep the warranty valid, never try to repair
the speaker yourself.
If you encounter problems when using this
speaker, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips website (www.philips.
com/welcome). When you contact Philips,
ensure that the speaker is nearby and the model
number and serial number are available.
General
No power
• Make sure the speaker is fully charged.
• Make sure the USB socket of the speaker is
properly connected.
• As a power-saving feature, the speaker
turns off automatically 15 minutes after no
audio signal is received or no audio device
is connected.
No sound
• Adjust the volume on this speaker.
• Adjust the volume on the connected
device.
• Make sure that your Bluetooth device is
within the operational range.
No response from the speaker
• Restart the speaker.
