Philips IP20, Installation And User Manual

Page: 10 / 36

Installation
&
User’s Manual
SL STRIP 400 RGBW LED Luminaires
8
INSTALLATION AND SET UP
Sh wline
3
.
Connecting to the DMX512 Network
Basic DMX512 installation consists of connecting multiple SL STRIP 400 RGBW LED Luminaires together
(
up
to 32 the control console
(
or DMX512 control source
)
to luminaires
)
in
"
daisy
-
chain
"
fashion
.
A cable runs from
the DMX Another cable runs from the other DMX connector on the first SL STRIP 400 RGBW LED Luminaire
.
connector on the first unit to a DMX connector on the next SL STRIP 400 RGBW LED Luminaire
(
or DMX512
Figure 4
:
SL STRIP 400 RGBW LED Luminaire DMX512 Input
/
Output Connections
Note
:
For more information on DMX512 networking and systems
,
refer to
"
Additional Resources for DMX512
"
on
page 1. For SL STRIP 400 RGBW LED Luminaire DMX Mapping
,
refer to
"
DMX CONTROL
"
on page 17.
Figure 5
:
SL STRIP 400 RGBW LED Luminaire
-
DMX512 Connections
Bottom of Unit
DMX 512 / RDM Input
DMX 512 / RDM Output
DMX512
DMX512
(
out from first
to second luminaire
)
DMX512 (
out to the next
luminaire or DMX512
controlled device
)
SL STRIP 400 RGBW LED Luminaires
DMX512 Connections
Note : Remaining pins on each connector are not used .
DMX512 Signal XLR Pin
Common ( Drain ) 1
DMX512 - 2
DMX512 + 3
(
from console or
control device
)
device to be controlled
).