Project Manager:
Trident Artist:
PHILIPS
HUE Accessories
Philips Hue wall switch module
N/A
Trident UK
322263907501
A4
Arno van den Biggelaar
ARTWORK
PHL462553
Trident UK, Connaught House, Connaught Road,
Kingswood Business Park, Hull, HU7 3AP, England.
T:+44 (0) 01482 828100
Please note that any low resolution paper Canon colour
copies associated with this job should be referred to for
content, layout and colour separation only.
UNDER NO CIRCUMSTANCES SHOULD THIS
ARTWORK BE ALTERED WITHOUT PRIOR
PERMISSION FROM TRIDENT.
Dieline
Guides
Technical & Non Printing Items
TR2132077
26/03/2021
C
Oli Hayton
Colours:
Master Ref:
TR Ref:
Brand:
Brand execution:
Product name:
Shape:
Wattage:
Region:
Artwork 12NC:
Die cut 12NC:
Barcode:
CRC Number:
Action:
Date:
1
Process cyan
LTH
2
Process magenta
LTH
3
Process yellow
LTH
4
Process black
LTH
Rocker switch
1-way
• 1-way switching using a rocker type switch is the default for the Hue wall switch module
in the Hue app.
• This installation is for connecting a single switch controlling 1 light point or circuit.
• For circuit diagrams please review the application notes on our FAQ page.
1. In most cases only the 2 disconnected (live) wires must be placed in the provided
push-in wire connector.
Never add a neutral and/or ground wire to the provided push-in wire connector.
Tip! Make a picture before removing the wires to remember the location.
2. Place 1 set of the provided yellow and white wires in position in the module
(see image 1).
3. Place the end of the wires in the same position where you removed the original (live)
wires from the light switch. In below example white will go on the top of your switch and
yellow on the bottom.
• When adding the module to your accessories in the Hue app, follow the instructions and
select single rocker for this installation (see image 2).
1 2
1
image 1
image 2
9
