Philips HTS9810, User Manual

Page: 35 / 62

English
EN
35
Pla
y
First time tuning
The fi rst time when you access ‘RADIO’ mode,
follow the instructions to install the radio
stations.
1
Press RADIO .
’AUTO INSTALL ... PRESS PLAY’ is
displayed.
2
Press
u
.
All detected radio stations are stored.
Once complete, it tunes to the fi rst
preset radio station.
To stop auto tuning, press •
x
.
Note
This unit can store up to a maximum of 40 radio
•
stations (and 20 radio stations from AM/MW band).
If auto installation is not activated or less than 5
•
radio stations are stored, ‘AUTO INSTALL’ will be
displayed again the next time you turn on to radio
mode.
Listen to radio
1
Press RADIO repeatedly to select ‘FM’ or
‘AM/MW’ band.
2
Use the remote control to control the
radio.
Button Action
Select a preset radio station.
m M
Tune the radio frequency
backward/ forward.
Toggle between FM stereo
and FM mono mode.
Press and hold this button to
delete the preset station from
the preset list.
The preset number for •
other radio stations
remain unchanged
Reinstall all the radio stations
1
Press
RADIO
repeatedly to select ‘FM’ or
‘AM/MW’ band.
2
Press and hold
PROGRAM
until
‘STARTING INSTALL’ is displayed.
All previously stored radio stations will
be replaced.
Note
If no stereo signal is detected or less than 5 stations
•
are detected during radio installation, ‘CHECK
ANTENNA’ is displayed.